Back

Raw MDF

Medium density board with uniformity of structure and excellent mechanical properties for the embodiment of wide creative possibilities.

Where to buy

Characteristics

Name of indicator	Standard	>6 to 9	>9 to 12	>12 to 19	>19 to 30	>30 to 40

Density, kg/m³	EN 323	780-810	760-820	725-800	735-740	720-735
Tensile strength perpendicular to the plane, no less than N/mm²	EN 319	0,65	0,6	0,55	0,55	0,5
Bending resistance, no less than N/mm²	EN 310	23	22	20	18	17
Bending elasticity modulus, no less than N/mm²	EN 310	2700	2500	2200	2100	1900
Swelling through thickness, not more than %	EN 317	17	15	12	10	8
Specific resistivity at normal disintegration of the surface, no less than N/mm²	EN 311	1	1	1	1	1
Humidity, %	EN 322	7±3	7±3	7±3	7±3	7±3
Roughness, mm	ГОСТ 7016-82	8—10 not for deep moulding

Name of indicator	Standard	>6 to 9	>9 to 12	>12 to 19	>19 to 30	>30 to 40

Density, kg/m³	EN 323	830	815-820	790	765-775	760
Tensile strength perpendicular to the plane, no less than N/mm²	EN 319	0,65	0,6	0,55	0,55	0,5
Bending resistance, no less than N/mm²	EN 310	23	22	20	18	17
Bending elasticity modulus, no less than N/mm²	EN 310	2700	2500	2200	2100	1900
Swelling through thickness, not more than %	EN 317	17	15	12	10	8
Specific resistivity at normal disintegration of the surface, no less than N/mm²	EN 311	1	1	1	1	1
Humidity, %	EN 322	7±3	7±3	7±3	7±3	7±3
Roughness, mm	ГОСТ 7016-82	≤7,5 for deep moulding

Name of indicator	Standard	>6 to 9	>9 to 12	>12 to 19	>19 до 30	>30 to 40

Density, kg/m³	EN 323	—	—	820-830	780-800	—
Tensile strength perpendicular to the plane, no less than N/mm²	EN 319	—	—	0,8	0,8	—
Bending resistance, no less than N/mm²	EN 310	—	—	20	18	—
Bending elasticity modulus, no less than N/mm²	EN 310	—	—	2200	2100	—
Swelling through thickness, not more than %	EN 317	—	—	12	10	—
Specific resistivity at normal disintegration of the surface, no less than N/mm²	EN 311	—	—	1	1	—
Humidity, %	EN 322	—	—	7±3	7±3	—
Roughness, mm	ГОСТ 7016-82	Increased density for deep moulding

Description
Medium-density fiberboard, widely used in furniture manufacturing, interior decoration, and door molding manufacturing as well as in construction.
Storage and Transportation
- Loading, fixing, transportation and unloading of packaged MDF boards are carried out in accordance with GOST 12.3.009 by any means of transport, provided that they are protected from pollution and mechanical damage, in accordance with the rules for the carriage of goods operating on this type of transport. Handling method should exclude damage to MDF boards and their coatings.
- When transported by railway, packaged MDF boards should be placed only in boxcars protected from moisture and internal movement.
- No blows on MDF boards are allowed during handling, transportation, storage and other operations.
- Transport packaging of MDF boards when stored at the customer can be stacked on top of each other in accordance with safety regulations.
- MDF boards should be accepted for processing in indoor premises with stable climate in storage area/workshop (in premises at a temperature from 10 to 40 degrees and air humidity of 45-75%, protected from direct sunlight. At air humidity of 50% in the premises, MDF board moisture content is 7-9%). The exposure time before starting any operations in the cold season is at least 2 days.
Certificates

Quality Control

We check the quality of products for compliance with standards of Turkey, Russia and EU countries in our laboratories on a regular basis. KASTAMONU enterprises have an integrated quality management system that meets ISO9001, ISO14001, OHSAS18001 standards.

Quality