Decorative panels Evogloss

• Loading, fixing, transportation and unloading of packaged PVC-coated MDF boards are carried out in accordance with GOST 12.3.009 by any means of transport, provided that they are protected from pollution and mechanical damage, with mandatory protection from atmospheric precipitation, in accordance with the rules for the carriage of goods operating on this type of transport. Handling method should exclude damage to PVC-coated MDF boards.
• When transported by railway, packaged PVC-coated MDF boards should be placed only in boxcars protected from moisture and internal movement.
• Handling operations, storage and stacking of PVC-coated MDF boards should ensure the preservation of their form and prevent mechanical damage during storage.
• PVC-coated MDF boards are stored sorted by sizes and types of packaging.
• It is allowed to transport PVC-coated MDF boards in containers in unit loads and stacks in accordance with the technical documentation agreed with the relevant transport departments.

• Evogloss panels should be accepted for processing in indoor premises with stable climate (in storage area/workshop) at a normal air temperature of 20 ± 5°С and humidity of 45-75%, protected from direct sunlight. The exposure time before starting any operations in the cold season is at least 2 days;
• PVC-coated MDF boards are stored horizontally on a flat surface;
• Before cutting, verify the labeling; make an external inspection of the panels for decor compliance, tone matching and possible visual defects;
• When cutting Evogloss panels, a circular saw with trapezoidal teeth shall be used. The angle of the circular saw mounted on the cutting machine should be 90°. It is not recommended to use a jump saw. The saw blade during cutting should be at a height that prevents the formation of wane edges. When cutting Evogloss panels, the most suitable speed is 15 m/min.

It is not allowed to:

• expose Evogloss panels to heating above +70°C (open oven, hot kitchen stove, lighting devices and heaters, hot steam, etc.), as this can cause deformation and delamination of the film.
• expose to mechanical stress (contact with sharp objects, friction).
• remove protective film from Evogloss panels before assembling the furniture.
• apply abrasive powders and solvents for cleaning Evogloss panel facades. Please, use soft damp cloth and soft detergents.
• work with Evogloss panel facades on non-smooth and uneven surfaces, which may cause damage to the film and decorative coating.